What customers notice from the sidewalk
Storefront glass does not have to be completely covered before it starts hurting the appearance of an entrance. Handprints collect daily around the doors. On the open plains, near-constant high wind keeps driving dust and grit back onto exterior glass between cleanings. Adhesive and paint-related spots stand out even more. Stickers, old tape, tape residue, and overspray remain visible and catch the eye from the sidewalk, requiring a different approach than a standard wash.
Razor work comes before the wash
We remove stickers, tape, and overspray with a razor before washing the storefront glass. At eye level, we use a flat razor holder to scrape away tape residue and overspray. The order matters: if we do not address the bonded material first, washing the pane just works around the adhesive and leaves a partial mess behind. Once those specific deposits are scraped off, we wash the pane as a complete surface.
Reaching awnings and transom glass
Storefront layouts often place exterior glass above the standard working height. For awnings and transom glass, we use a ladder with standoff stabilizers. This setup allows us to safely reach and clean the upper panes without resting the ladder directly on fragile aluminum frames or the glass itself. A storefront looks unfinished when the lower panes are clean but the transom glass above continues to show dust and street grime.
Per-pane storefront pricing
Exterior storefront window cleaning runs from $2 to $7 per pane. We price by the individual exterior pane rather than the overall width of the building. A storefront with a divided grid has more panes to clean than one with large single-pane sections. The final per-pane cost depends on whether the glass requires razor work for stickers and overspray, or if we need to set up a ladder with standoff stabilizers for transom glass.
Setting a recurring cleaning interval
We run fast recurring route stops timed to how quickly the storefront shows handprints and street grime. Gillette's weather dictates a lot of this rhythm. The average first frost date at our 4,280-foot elevation is October 22, and spring warm-ups can be slow—on June 14, 2026, the 2-inch soil temperature was 54.1°F, running 7°F below the 10-year normal. These seasonal shifts, combined with the constant windblown grit on the plains, mean a storefront's cleaning needs change throughout the year. We adjust your route stops based on the visible return of grime, not an arbitrary calendar.
Working Around Gillette
A few Gillette conditions we plan around on every job:
Climate
- Low annual precipitation and blowing basin dust leave a fine film on commercial storefront glass faster than in wetter regions.
- High wind is near-constant on the open plains, driving dust and grit onto exterior glass between cleanings.
- Freeze risk is high; routine exterior glass work pauses during hard freezes and concentrates in the shoulder seasons and warmer route months.
- Spring through early fall are the heavy commercial route months, once overnight temperatures stay reliably above freezing.
Soil & Ground
- Powder River Basin high-plains terrain with alkaline, dusty soils that wind carries onto building exteriors.
- Semi-arid ground cover means wind-blown dust, not rain, is the main thing dirtying exterior glass here.
Local Notes
- The I-90 and US-14/16 commercial corridors and downtown carry the retail and office glass that drives storefront route demand.
- Gillette is the seat of Campbell County and the commercial hub of Wyoming's Powder River Basin, long branded the "Energy Capital of the Nation."
- The local economy is built on coal, oil, and gas, supporting a dense base of offices, storefronts, hotels, and industrial facilities that need recurring window service.
- Population is roughly 33,000 and Gillette is the trade center for a wide rural catchment, so commercial cleaning demand concentrates in town.
What the Work Involves
A few photos representative of the work.
How It Works
-
Call or Text
Tell us what you need done and when — you'll get a straight answer, not a sales pitch.
-
Free On-Site Quote
We size up the work in person — access, scope, and timing — so the quote is real, not a guess.
-
Written Quote
You get the scope and the price in writing before any work starts. No surprises.
-
The Job, Done Right
We do the job right the first time, clean up after ourselves, and stand behind the work.
What this typically involves:
- Traditional mop-and-squeegee detailing at storefront level for streak-free, edge-to-edge clarity
- Rope-descent drops on high-rise elevations, rigged to independently inspected roof anchors under OSHA rope-access rules
Pricing Ranges
These are planning ranges. Nothing is final until it is in writing.
$250–$900
$8–$20
Questions Gillette Customers Ask
How often should a commercial building have its windows cleaned?
Most storefronts and offices land on monthly or quarterly service. High-traffic retail, restaurants, and car dealerships often go weekly or bi-weekly because handprints and street grime show fast, while a low-traffic office park may be fine quarterly. We set the interval to how quickly your glass actually shows dirt, not a one-size schedule.
What is water-fed pole cleaning and why do you use it?
A water-fed pole feeds purified water up a long carbon-fiber pole to a brush head, so a technician cleans upper-story glass from the ground. The water is run through reverse osmosis and deionization until it is pure, which means it dries with no spots and no detergent film. It is safer than ladders on upper floors and leaves frames and sills cleaner too.
Why does purified water dry without leaving spots?
Tap water carries dissolved minerals that stay behind as spots when the water evaporates. Running it through RO/DI filtration strips those minerals out, so pure water lifts dirt, rinses clean, and evaporates leaving nothing behind. That is why fed-pole work needs no squeegee and no soap on the final rinse.
Can you clean the windows on a high-rise or multi-story building?
Yes. Reachable elevations are cleaned from the ground with water-fed poles; higher glass is cleaned by rope descent from OSHA-anchored roof rigging or from an aerial lift. Which method we use depends on the building's height, its anchor points, and safe access, all of which we confirm on the site walk before quoting.
Do you clean the inside of the windows too, or just the outside?
Both, if you want it. Many commercial contracts are exterior-only on a frequent cycle with interiors added a few times a year, since inside glass stays clean longer. We price exterior-only and full exterior-plus-interior separately so you can choose.
Does the price include frames, sills, and screens?
It depends on the service level you pick. A basic exterior clean is glass only. A full detail adds frame and sill wipe-down, track cleaning, and screen cleaning. We quote both so you can see the difference rather than finding out what was left out after the crew leaves.
Other Things People Ask
What areas and building types do you service?
Storefronts, offices, restaurants, hotels, dealerships, medical buildings, and industrial and municipal facilities are all standard commercial work. If a building has glass and safe access, we can quote it, and we handle both one-time cleans and recurring route contracts.
Our Service Area
Crews serve Gillette, WY. Call (307) 670-7443 to confirm coverage for your address.
Other Services We Offer
Where We Stand Before You Call
Straight Answers
Call (307) 670-7443 for a free estimate.